NASA Pathway to Space – Drone Edition

Rockets and High Altitude Ballooning Yet To Come

PathwaystoSpace2015_Inservice_pdf I announced the NASA Pathway to Space class for teachers about a month ago:

“Starting next week a team of educators (including me) will be providing a class for local teachers of grades 3rd – 12th which will include hands-on training in building and flying drones, rockets, planes and designing payloads which we will then launch on a high altitude balloon to somewhere between 65,000 to 100,000 feet.”

I mentioned at the time how, along with the training, teachers would receive a drone (UAV) and build and keep another as part of the class. The first 4 classes focused on drones. Not just building and flying them, but on the laws and ethics that teachers and students must take into account in using them.

Below: Kirk Ellern from “AboveNV” explains some of the rules and laws around drone or UAV use. DSCF0289

  DSCF0312

Above: Participants getting the hang of flying their new drones (cost just less than $50 including remote). 

Learning to fly the little drones is actually more difficult than the larger ones which is why Kirk Ellern and Rob Dunbar from AboveNV suggested using them. “If you can control one of these little fairly indestructible guys, piloting the larger ones is relatively easy.”
DSCF0329

 

Next, each participant built a “chuck” plane from a kit – so named because you throw or “chuck” it to make it airborne. However, these planes are designed to have a motor, remote control and more added to them if one wishes to do so.

  DSCF0350 

Teachers building their planes, YouTube videos demonstrate each step of the building process.
Untitled
HOBC8940

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Above: A first flight

So they’d be ready to fly larger drones they were given time with flight simulator software.
Untitled

We designed this class so that we meet on 2 to 3 Tuesday evenings to learn about and build drones, rockets, balloon payloads and then on a Saturday to fly what we’ve learned about and built. We were ready now for our “Drone Saturday” – so we met on a soccer field at a local high school and thanks to “AboveNV” and friends bringing multiple drones of all sizes we learned about and flew drones for hours. This included flying some while wearing goggles that see through a camera on the drone, so you are flying the drone like you are onboard.

DSCF0535

  DSCF0524

DSCF0531

  IMG_5365

IMG_5367

We really lucked out in that there was not a puff of wind all morning which made it easy to fly all the different sizes and types of UAV’s (Unmanned Aerial Vehicle) we had available. Here’s a link to all the photos from our “Drone Saturday.”

Up next is rockets!

Learning is messy!

As Promised …. Cantilevers With Students

STEM and STEAM

Untitled

In my last post, where I tried out including an art component to this powerful engineering problem with cantilevers on teachers, I explained that as soon as I could try it out with students I would get back about how it worked. Fortunately one of the teachers in that training volunteered his class.

The first challenge 5th grade students received today in Dan Scurlock’s class is seen to the right:

As always students are given as little explanation about how to build a cantilever as possible. I use one paint stick and one washer and show them how you can get more length off the end of the table with the washer on the end. That’s it … now it’s all up to them. Students worked in pairs. I lent a camera to each pair to archive their progress. Link to Flickr set of their photos.

Untitled

In addition they collected measurement data each time they added length to their span with a measuring tape … measurements in centimeters.
Untitled

Untitled

They worked initially for about 20 minutes. There was lots of “messy learning” as students learned about the materials (washers and paint stir sticks). Crashes to the floor were followed by a mix of disappointment and excitement.

Untitled At the end of the first 20 minutes each pair was given a large “sticky note” to post the data from the longest span they had engineered. DSCF0182

 

 

 

 

 

We displayed these on the board and then after some discussion (I’m not sharing it all here for brevity, but the debrief is a powerful aspect) the students decided it would be a good idea to order the data from least to greatest. So we did:

Untitled

Next we did a “gallery walk” around the room so students could check out the designs others had come up with, and we had them point out design features that seemed to lead to longer spans.

Now that students had some experience with building spans, I had them take what they had learned and asked them to try to build even longer spans. They enthusiastically got back to work … a few adjusted spans that were still standing from the first experience, but most started over from scratch.

It was apparent right away that they had learned not just techniques, but confidence too.

DSCF0472

After an additional 20 minutes or so we collected their data on a different color sticky note, posted them and compared results:DSCF0520

When asked to compare the data, students noted how the shortest span from the second experience was almost as long as the longest from the first. The data is rich with analysis possibilities (that I won’t go into now, but may add later, especially if you bug me, 🙂 ) and I can share from doing this numerous times that 90cm is short of the longest spans students have accomplished (even K/1st graders will build longer spans given repeated experiences).

We used this data sheet to begin figuring out how much their cantilever span would cost if you set a price for materials (easily made grade level specific by changing the numbers used), but I wanted them to figure out what to do with the data themselves and we didn’t have time … and Dan was excited about the prospect of crunching that data later when they had time to really go deep with it. NOTE: This photo doesn’t show the last line that asks for cost per centimeter.DSCF0058Lots and lots more to do … more investigations trying to make their spans longer …. other ways to analyze data … how to construct the most “cost effective” span and more. But not today.

The STEAM Challenge: And then I explained the word “aesthetics” and how often designs and products and architecture incorporate aesthetics to make them beautiful and even more functional. I used my iPhone and a box that pens came in as an example … “… the box and phone are about the same size, and the box shape takes no real extra, possibly expensive, design time and effort, but the rounded corners and thin profile and other aspects of the iPhone make it more visually appealing (“cooler”), easier to hold, easier to put in your pocket (etc.) ….”

“Now your challenge is to build a structure that is still a cantilever, but how long it reaches off the table is not as important as how “aesthetically pleasing” … how beautiful it is. I’ll even supply you with extra materials if you run out before your structure is finished.” (Note, as students “finished” their structures, one extra challenge I gave them was to see how far off the table they could really get it … and they had fun pushing the limits until it crashed to the floor. NOTE: students had been working now for over 90 minutes and it might have been best to stop here if not earlier – but I wasn’t going to be able to come back soon, and Dan really wanted them to have this experience. But when I was done explaining this investigation it re-energized the class … they were very enthusiastic about jumping back in. Here are some of the results:

  DSCF0517

DSCF0503

  DSCF0495

DSCF0483

  DSCF0505

This group was super excited when they figured out theirs was transportable! 🙂 DSCF0514

  DSCF0512
I just happen to be shooting a photo of this one when it collapsed!  Untitled

Imagine if students had more than 20 minutes and/or re-visted this experience on other days!

Check out more examples by following the link above to their Flickr set as well as this one and this one.

Before I left I explained that I would leave all the materials with them for a few weeks so they could continue their investigations. Cheers ensued. Dan said he would share more photos and feedback on what they did AND he suspected other teachers (some had even stuck their heads in to see what was going on) just might want to borrow them as well.

Learning is messy!

Exploring STEAM Education

Here's what happened - IT WAS AWESOME!

I announced in my previous post about my upcoming involvement in a STEAM (Science, Technology, Engineering, ART and Math) day at the Nevada Museum of Art. I was trying out a new idea to integrate art into what before had been strictly a STEM (Science, Technology, Engineering and Math) inquiry lesson utilizing cantilever spans (the lesson is explained here).

STEAM_teacher_training_flyer_winter_2016-3_pdfIMG_1044

The original lesson was built on the work of Ken Wesson who gave Lou Loftin (my frequent collaborator in PD delivery)  the original idea of using cantilever construction as an inquiry piece. He encouraged us to “go with it” and we have. We report back to Ken whenever we see him about how awesome the cantilever spans experience is. He usually just beams and encourages us to keep promoting it and innovating with it. Ken, by the way, is a great speaker, I’ve seen several of his keynotes and he brings the house down!

My idea to add the art component to the lesson was this: We started out following the original introductory lesson, pass out the materials and challenge the participants to build as long a span with those materials as possible (in groups of 2 to 3) … the difference was on this day that I only gave them 5 minutes to build. I mainly wanted to give them some experience with the materials and building a span AND to have them experience the STEM version even a tiny bit. We debriefed their experiences, I described the multiple ways to continue and leverage the lesson (which can go for days or weeks BTW) and then I changed the challenge … the focus:

“This time when you build your cantilever span your total focus is to be on the aesthetics of the span. It doesn’t matter how far out from the edge of the table it reaches, as long as it does, …make it beautiful, creative … GO!

I was pretty sure this was going to elicit some creative structures … I way under estimated … the designs, even in the limited time we had (15-20 minutes) were fantastic! Here are just a few examples:

DSCF1329

 

 

 

 

DSCF1411

DSCF1369

 

 

 

 

 

 

 

 

 

 

 

DSCF1365

 

 

 

 

 

 

 

 

 

DSCF1405

 

 

 

 

 

 

 

 

See what I mean?  There are just too many to post … but here is a link to all of them on Flickr.

I had four groups of educators cycle through the 50 minute lesson during the day. When I debriefed them each group spoke about how they loved the creativity aspect. We would always make time for a “gallery walk” during each session and many noted how they were so focused on what they were creating that they didn’t even notice what those all around them were doing until we did the walk. Many took photos and asked questions and conversations began about the process … unfortunately we always had to cut those conversations short. We did discuss the writing, math, research and other integrations and connections … including collaborating with classrooms anywhere in the world, that should happen along with the STEM or STEAM version of this or any lesson.

If you’ve already experienced cantilevers with your students I fervently suggest going back and having them experience this “art” connection variation. If you’ve never done it I suggest having your students build long spans for awhile (days or weeks) and then after they have experience with the materials try the aesthetics piece (but certainly do it any way you and they want … just a suggestion) I can’t wait to get into some classrooms and try this with students! Reminder: The cantilevers lesson is appropriate for ALL students Pre-K – 12. When I do get into classrooms I’ll report back! If you beat me to it, please share your experience!!

Learning is messy!

The “Teacher in Space” – Still Touching the Future

Christa McAuliffe and The Space Shuttle Challenger

I’ve seen numerous “tweets” today, on the 30th anniversary of the event, from people sharing where they were when they witnessed or heard about the Space Shuttle Challenger disaster. I was teaching 7th grade in Oakland, California, and our principal called my classroom to make me aware of what had happened since we weren’t watching live. We tuned in and watched the coverage for awhile and then discussed what had happened. The fact that Christa McAuliffe, the “Teacher in Space,” was a crew member added layers and significance to the discussion.

Twenty some years later my class had the privilege of having Grace Corrigan, Christa’s mom, visit our classroom. (the link takes you to a post about that day)grace4.jpg

We only had one day to prepare for her visit so we learned a bit about Christa and the history of the Challenger, including watching video of the tragic liftoff, but then spent the rest of our limited time writing questions to ask her. We were told Grace would love to answer questions so that’s what we focused on. What to ask and what not to ask  … what is appropriate and not. It was a more powerful learning experience than I expected and the students (4th graders) did a great job. Earlier in the year we had worked hard on speaking up and not showing nervousness, as much as possible anyhow, and that really paid off. You can read about the day we had – here and here

One of our major takeaway’s however was realizing how much we learned about incorporating technology just as part of how we learn and work. When my class first went 1:1 with laptops … it was all about the laptops and what they could do … they were a shiny, bright object students couldn’t stop staring at. But now, however, because they had easy access and used them routinely, the technology had become more like a pencil … just things we use when needed without thinking about them much. And that was true of the other technologies and applications we commonly used – video-conferencing, cameras, blogs, wikis. The shiny-ness and bright-ness hadn’t totally worn off, but now more often than not, partly because of ubiquitous use, they are just powerful tools we utilize in our learning.

As part of Grace’s visit students researched the questions they were writing and wrote them out on their laptops and our printer. We shared her visit live on Skype (audio only) with collaborators in Virginia and New York. We recorded and posted her visit as a podcast and video-cast (I recently changed internet providers and will have to re-post those at some point). Students took the photos that illustrate this post and the other posts I’ve linked to. And, as we often did, we blogged about the experience as part of a process of debriefing and archiving learning we were finding valuable. GraceCorBlogPost

 

We did all those things not so we could use the technologies, but because using the technologies helped us learn and made it possible to share and collaborate on our learning globally.

An incredible learning experience meant for 28 students broke through the walls of the classroom that day.

A great day and way to learn and share about history and science! (and so much more) Christa’s legacy and message continue to “touch the future.”

Learning is messy!

NASA Pathway to Space Class

PathwaystoSpace2015_Inservice_pdf

Starting next week a team of educators (including me) will be providing a class for local teachers of grades 3 – 12 which will include hands-on training in building and flying drones, rockets, planes and designing payloads which we will then launch on a high altitude balloon to somewhere between 65,000 to 100,000 feet. The class filled in one day.

This is the second NASA Pathway to Space class we have offered, but the first to include drones. Last year’s class included rockets, planes, tissue balloons and a high altitude balloon experience as well.

We love providing Professional Development like this where we not only train teachers in the building and flying of the various “vehicles” – but also provide them with the materials and support to make it happen with their students as well. Teachers will either get their own drone as part of the class, or be able to check one out depending on our funding, but also planes, rockets and a balloon launch their students can utilize to send payloads they design up to near space.

Funding for the class came from a NASA Space Grant that includes funding for a second class next fall – so local educators watch for the announcement for that class, probably in late summer. Lots of hands-on messy learning for both teachers and students … my kind of class! 🙂

Learning is messy!

Solid Professional Development + ALL the Materials to Implement Powerfully = Student Learning

The PD We Need

One of the major downsides of 15 years of NCLB and RTTT has been the silo-ing and narrowing out of subjects, especially in elementary schools, and brutally so in the most “at risk” schools. Beside students missing out on the most engaging subjects, after 15 years of NCLB and RTTT, the basic and  support materials for subjects like science, and therefore STEM, have either long since been thrown out, or are painfully out of date.

Throw in the Next Generation Science Standards that have been adopted by my state that (thankfully) are performance based standards … standards that cannot in any way be met by reading about them and answering questions or taking a multiple choice test (YES!!!) … standards that require students TO DO science and engineering and then be assessed via being able to model or in other ways demonstrate their learning. Even the state assessments are being designed (supposedly, hopefully) so students have to model and demonstrate learning instead of bubbling answers.

I remember only too well during my 30+ years as a classroom teacher the frustration in receiving professional development (PD) in language arts, math, science, art and pretty much every other subject, and being supplied the necessary materials for myself during the training, only to be told at the end of the day that, “We don’t have the supplies you need to take back to your students, but maybe you can talk your principal or PTA into funding the materials you need to do these great activities in your own school and classroom. Good luck!!”

With that in mind we work hard to write grants to fund not just the PD we deliver in STEM, but also to provide ALL the needed supplies and materials to implement the lessons and activities in the classroom. Teachers consistently give us feedback on how much that means to them and how much more successful they are at providing quality learning experiences for their students when they are not spending valuable time begging and rummaging for resources.

Unfortunately we are not always successful, we are too often told that the grant would have supported the PD, but monies have already been allocated to schools for books and materials and they have to provide that themselves (did I mention my state is too close to 50th every year in supporting education with resources?) so we are not funding your grant at all, or only the part involved in delivering the PD.

Fortunately, we have from time to time been successful at receiving grants that fund the PD AND required supplies. Recently we received just such a grant (but got turned down for an even bigger one for the very reason stated above).

Another issue that diminishes the impact of PD is when it is not grade level specific. Certainly not all PD has to be grade level specific, but what we have found over the years, is that especially in subjects like science and STEM (and art, PE and others too to varying degrees) that teachers have so little content knowledge and experience in teaching them (again thanks NCLB/RTTT) that they struggle taking PD in those subjects back to the classroom successfully if the examples and lessons demonstrated and experienced are not mostly specific to their grade.

The good news is the grant we received this fall, and we started delivering PD for this week, is both grade level specific AND supplies the necessary materials AND includes several follow-up day long trainings during the year.  It doesn’t get much better than that. PD We started with 2nd grade teachers on Monday teaching them about the materials they were receiving to use with their students and what to do with them … but at the end of the day we walked them into our warehouse and they picked up boxes and plastic containers of materials and a literacy component and links to a support wiki page and Flickr photo site we will build during their trainings and year long classroom experiences … the smiles were wide. Supplies

And then, get this, they get the consumable supplies that they use up replenished each year by us … they don’t have to take the time or expense to do that … just focus on the lessons and the learning.

This is the PD teachers need. It’s a model we’ve found to be successful, now we have to get the decision makers to buy in.

This scenario will repeat itself through 2 cohorts this year for every grade level K – 7 (hoping to go Pre-K – 12 next year (note that grant folks – teachers need the materials too!!!). And all teachers trained get access to all the materials for at least the next few years.

Learning is messy!

STEM Ambassadors Program

Bringing STEM experts into our schools

STEMamb1Beth Wells, the Executive Director of the Nevada STEM Coalition (I’m on their board of directors) asked us to provide a training to STEM professionals that have volunteered to be part of our new STEM Ambassadors program. From the STEM Ambassadors web site:

“The STEM Ambassador Program is a statewide initiative by the Nevada STEM Coalition and partners, designed to connect students with volunteers who use science, technology, engineering or math (STEM) skills in their majors and careers.

Volunteers register on the STEM Coalition website with their availability, interests and skills. Teachers contact the Coalition when they need speakers, project participants, or contest judges. Training is offered for volunteers who would like more knowledge about what to share and what kinds of activities enhance the new Nevada Academic Content Standards in Science.” (Next Generation Science Standards)

We fed them dinner and then got them involved in a hands on engineering activity building a “cart” from a bag of materials …  but no directions. The idea for the activity (which we tweaked a bit) came from FOSS (Full Option Science) out of the Lawrence Hall of Science in Berkeley, California. FOSS is really the only hands-on program out right now that is fully aligned to the Next Generation Science Standards and provides all the materials required to facilitate the lessons in a classroom.STEMamb2

After 20 minutes or so each pair had successfully constructed a cart that had rolling wheels. Next we had participants rotate around the room and inspect each others’ designs. They were require to “push” each cart as they inspected it to learn how well each one rolled. We encouraged taking photos of designs they liked and some did.

Next we asked them if all of the designs were the same and they noted that no two were alike. We gave them 8 minutes to incorporate anything they learned into their cart (re-engineer). All changed at least a little, but over half made changes based on designs that rolled better. Half made aesthetic changes to their carts when they noted they still had time. That was a discussion point and the connection to STEAM (adding art to STEM) was noted.

ImproveDesign

 

Cart1

2Carts

 

 

Ramps were set up and the STEM Ambassadors ran trials and collected data on how far their cart would roll from the top of their ramp.

 

 

 

RampCart

Then we debriefed the data and experience in general.

The goal of the night was to prepare the participants, some from non-profit organizations, some business owners, but all with connections to STEM, to volunteer in schools. We informed them that there were multiple ways they could be involved in promoting and supporting STEM in our schools (see quote above) and we wanted them to be aware of the kinds of activities we were training teachers to facilitate in their classrooms. That way they could better support those kinds of learning experiences and even facilitate and provide the materials for their own hands-on learning piece when they visited schools if it fit their situation – for example if they were a transportation company the activity we did tonight, or one similar would be a great fit.

It was a great night that ended with a round of networking (sharing contact info).

Learning is messy!

Some Thoughts About The “T” in STEM

And Technology Integration In General

In several of my presentations on STEM Learning I share how it seems some grade level planning sessions approach STEM.

X   Science – “We have science twice a week now for 30-45 minutes.” “Check”

X   Technology – “We go to the computer lab once a week for 30-45 minutes and run apps on the school iPads in class occasionally.” “Check”

X    Engineering – “We’ll fold paper airplanes the last 30 minutes on Friday, fly them, then refold them to see if we can get them to fly further.” “Check”

X    Math – “We do math every day!” “Check”

“LOOK! We’re a STEM school (or grade level) and we didn’t even know it!”

There are several (at least) major issues with the above scenario, but this post will deal mostly with the technology piece. I’ll just say it right up front. When I visit schools, attend trainings or presentations that purport to be about “model,” or even just “pretty good,” STEM learning programs, what I mostly see are what I’ll call “SEM” learning programs. I’m not saying there are no good STEM programs, just what I mostly see is “SEM.”

Why no “T”? The technology use/integration I observe is usually poor … often just an afterthought or so we can say it was there, rarely used powerfully, rarely used as a collaborative/connecting piece, rarely used beyond fairly mundane, “instead of a pencil,” …  “to look something up” kinds of ways. There is some interest now in using computers to “code” or program using computers, and that is definitely a good thing, but not if its just during “The Hour of Code“. One issue is some STEM programs teach that anything from a rock, stick, pencil or paper cup, if used thoughtfully is technology (which is true) … but then pretty much anything anyone ever does would involve technology. But I don’t think that “T” in STEM was included with that in mind. DSC06565

Blogging and video conferencing and making a web page or podcasting or producing a video or programming and any other way someone might use technology are OK. But if they are not being used consistently to produce, analyze, problem solve and share, its a bit like dieting to lose weight a few days a year.

I see time and again students involved in inquiry and other lessons that involve data collection and drawing conclusions and more, but that’s where it ends. Often these experiences are engaging and motivating and kids are excited and we end right there. We have the students right where we want them, where they are motivated and have reason to analyze and learn more about what happened … and to get there they should be discussing and arguing and deciding (maybe agonizing over) how and what to post that their data and observations showed AND their conclusions.

Now, how best to share that? (another creative problem to solve). It involves that “making” piece online.” What are we going to “make” to publish our learning, and how can we make that piece engaging as well? Something we can create that will make others want to learn what we learned and perhaps converse and even collaborate about? The process of sharing learning is often where misconceptions or errors in trials, basic understanding or data collection arise and can be dealt with.

I’ve found that this is when students relive what they did and get excited about it again (even though this is hard work). Partly through the give and take and creative release from designing and writing a program or producing a video/podcast/blog post/captioned photo or whatever, and since they have shared … now they have the opportunity to discuss and perhaps collaborate (if that wasn’t already part of the learning) with others … perhaps experts they or you have found to share their work with, or just others that come across their posted results, … there are so many possibilities here that utilize that “T” in powerful ways that stress problem solving, communication and collaboration … and too often this vital learning is left behind. Perhaps because it’s value is not understood or valued and because the perception is that, “We don’t have time.”.

I’m not saying you to go this deep EVERY TIME, but MORE of the time for sure. It is how technology actually becomes a powerful learning tool.

I emphasize all the time how all those publishing and analyzing pieces are what make a solid STEM program the best ELA and math learning your students will do. But not if we leave it behind. It’s hard work on the students’ and teacher’s (facilitator’s) part … and it is time consuming … and we have that incessant “tick, tick, tick” that time is going by and I have to get through this and move on! Maybe just to get done, or worse so we will be ready for testing. But this is the “messy” learning our students deserve. Publishing to the world is another reason to be accurate, clear, concise, creative and much more.

What are your thoughts?

Learning is messy!

 

Use Powerful Tools Powerfully

Over the years I’ve had the pleasure to work, via various social networking sites, with Kathy Cassidy, a teacher “of six year olds,” in Saskatchewan, Canada, according to her class blog. We’ve even met face to face at conferences. My class (4th – 6th graders) shared blog posts and comments with her students a few times, and we Skyped at least once. Kathy recently shared a post on the Powerful Learning Practice blog about “Five Ways To Use Skype.” Some of the aspects of the post I want to highlight are that yes, ‘even’ 6 year olds can connect online in ways that provide powerful learning opportunities for them, and Kathy makes the point that, “If we are going to use technology, we need to use it well.” Check out her post, she shares some great ideas on connecting your students.

Reading Kathy’s post had me re-visiting a point that has been made by others (and me) over the years, but a point that needs repeating … repeatedly, because it is such a vital point to make.

There are very powerful learning tools available on the “inter webs,” and many are free to use … video conferencing tools like Skype, Google Hangouts … blogs, wikis, online photo and video archive sites (like Flickr), and many more. As Kathy and others point out there are powerful ways to use these tools that connect students, experts, facilitate collaboration globally, provide the ability to design, produce, edit and share content in any subject, and so much more (and yes, occasionally just to do something fun or cool!).

There are many of us that have been working very hard to spread the word about how these tools facilitate new, innovative and engaging approaches to learning. How they require teaching our students to be active learners instead of teaching them to be taught … sit quietly but attentively, raise your hand if you have a question, then wait for me (as the teacher) to decide this is an OK or appropriate time in my lesson to break from my cadence, my lesson, and answer your question or listen to your comment … now … or not.

So what’s my point already? It’s the point Kathy made: “If we are going to use technology, we need to use it well.

Ever since personal computers and other technologies were introduced, their praises as learning tools have been sung from the highest rafters. Unfortunately, much more often than not, when technology has been purchased with improving education, improving student learning, improving student achievement or (yuck) improving student test scores as the goal … the technology or tool has been the focus with too little thought or professional development or teacher autonomy considered to actually use the technology in ways that empower students and/or their learning. The results therefore have been ugly and have lead to a backlash about the actual value of technology and connectedness as pathways to learning.

In addition, the tunnel-vision of test scores in language arts and math have turned too many computer labs and other technologies into drill and practice, test prep and “what apps can we get that will engage the students” dead ends. That use of technology as learning tool is like buying a Ferrari just to listen to the great stereo while its parked in the garage.

There is nothing wrong, especially as a way to gain experience with the technology, to do a video-conference or two that is mostly about saying hi to a class in another state or country and share some basic information. But if that’s all you do … then that’s probably not “using it well.” Collaboration, sharing and analyzing data, simultaneously performing an experiment or activity to see if location changes the results, read alouds between students, an international poetry festival between classes … that’s more like it. Students tend to be more engaged, spend more time editing, ask more clarifying questions … because these students from somewhere else, and maybe others, are going to see it … I want it to be good.

Blogging is awesome! Blogging is writing for sure. But its also posting photos, videos, podcasts, vid-casts … and because blogging is a two way street (because others can leave comments) its a conversation. Students can post any kind of writing you do in class, and yes, I’ve even had them post a written response about their reading. But also creative writing, science experiments, reports on any subject, short stories, long stories, explanations, diagrams and representations of math problems and concepts (that other students from around the world can see, discuss and argue about). But also photo essays, video clips of anything, pieces they write just because they want to (my new puppy, my birthday party, what happened when we got a flat tire, I was so scared when …) … and again, these pieces are published to the world … and the world responds, and that leads to more writing and thinking deeply about the response, and sharing ideas and realizing what is different about living in different parts of our city, state, country, world.

I could go on explaining the power of wikis, photo and video sharing sites and more. But that will just belabor things.

Too often we utilize technology and the web because they seem to be automatically engaging for students .. at least for awhile. If we aren’t learning as educators how and why to use these powerful learning tools and opportunities to enable our students to do important, meaningful work. If we allow ourselves to feel unprepared or stupid or phobic about using technology and perceive that our students know more about it, or worse, see it as a way to keep students busy in the computer lab while we grade papers or do other “teacher stuff.” (yeah I know that you probably don’t get enough prep time). Then we are leaving its promise and capacity as a learning facilitator, connector and collaboration tool on the cutting room floor. We might as well not bother with it.

So as Kathy said, “If we are going to use technology, we need to use it well.

Learning is messy!

Men Don’t Believe There is Gender Bias In STEM Fields?

My last post about engaging more girls/women to be interested in STEM fields was apparently at least somewhat prescient … at least the topic. This recently published study: “Quality of evidence revealing subtle gender biases in science is in the eye of the beholder,” comes to conclusions such as:

“Ever-growing empirical evidence documents a gender bias against women and their research—and favoring men—in sci- ence, technology, engineering, and mathematics (STEM) fields. Our research examined how receptive the scientific and public communities are to experimental evidence demonstrating this gender bias, which may contribute to women’s underrepresen- tation within STEM. Results from our three experiments, using general-public and university faculty samples, demonstrated that men evaluate the quality of research unveiling this bias as less meritorious than do women. These findings may inform and fuel self-correction efforts within STEM to reduce gender bias, bolster objectivity and diversity in STEM workforces, and enhance dis- covery, education, and achievement.”

It’s even a fairly short read as these things go, so getting bogged down in a time suck isn’t much of an issue. Note the limitations to their study as well as how they did their research which the authors report as well. You might also find this post from Think Progress about the study interesting as well .. note studies the author of the post shares too.

Do the results mirror your experience with gender bias in STEM?

Learning is messy!